LoRa APRS firmware (iGate, digipeater, tracker) for the Heltec WiFi LoRa 32 V3 and the Heltec Wireless Tracker V1.1 (433 MHz), based on ESP32APRS_LoRa (nakhonthai) with the core of AR-APRS (LU6JMF). Flashes everything in a single click, directly from your browser (Chrome or Edge), no software installation needed.
Check which board you have before installing: each button installs the version built for that board, and the wrong one may not work correctly. If the Wireless Tracker does not show up as a serial port, unplug it, hold its BOOT button (the one that is not RST) while plugging the USB cable back in, then try again.
First access: connect to the WiFi network AR-LORA_AP (no password), open http://192.168.4.1 and log in with admin / admin. The board starts with callsign NOCALL and every mode off: it does not transmit until you configure it. Default radio: 433.775 MHz, SF12, BW 125 kHz, CR 4/5, sync 0x12 (LoRa APRS standard).
Already running AR-LORA and want to update without USB? See the release notes ("Existing device" section).
Repository: github.com/marceloferreirachile/ESP32APRS_LoRa
License: GNU GPL v3, based on ESP32APRS by Somkiat Nakhonthai (HS5TQA). The complete source code of any released version is available on request, free of charge, for at least 3 years: marcelobrachile@gmail.com (include the version number).